BITMAIN – S17 – 43 TH

  • Price
  • Price in India
Buy Now


  • Hash rate
    35~50TH±3% / 50TH ±6%
    35~50TH±3% / 53TH ±6%
  • Frequency
  • Fan
    4 fans @ 12 V and 2.4 A
  • Fan speed
    6000 rpm
  • Operating temperature
    0 - 40°C
  • Surrounding humidity
  • Noise(dBA,25°C)
    82 dB
  • No. of PCIE connectors
  • No. of hash board
  • No. of chips
    144 in total
  • PCB high temp protection
    75 °C
  • Power consumption
    1470~2100± 7% / 2250W ± 7%
    1470~2100± 7% / 2385W ± 7%
  • Efficiency
    42J/TH± 10%
    45J/TH± 10%
  • Voltage
    PSU attached
  • Weight
    9.5 KG
  • Dimensions
  • Packing weight
    11 KG
  • Packing dimensions

Warranty and Shipping Terms

  • 1. Miner would be shipped within 3-4 days of payment confirmation and miner is readily available for shipping
  • 2. Write an email to [email protected] to enquire about shipping and insurance costs
  • 3 Please be aware: S17 +43T PSU is inclusive, and the PSU we provide is specially customized for our miners. Since customers require different types of plugs, the PSU does not contain 220V AC cables. You can order the standard IEC C19 AC power cable to use with the PSU.
    1. a) All Bitmain S17 +43T will be tested by factory before shipment and certified by Bitmain The post-sales service policy is as follows. After payment, your order will be processed immediately
    2. b) 180 days parts warranty for any miners directly purchased from Innosilicon. If any problem, please leave an after-sales message on our email at [email protected] Our technical support team will get in touch with you asap.
    3. c) Please don’t send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer
    4. d) The price of miners may be adjusted at any time without prior notice or price compensation to customers;
    5. e) The warranty expires in the following cases
  • Miner is demolished, privately altered or component replaced by customers
  • Damage caused by lightning, voltage surges and poor-quality power supply
  • Circuit boards and components damaged by water, exposed to moisture or corroded
  • The circuit board or the chip is completely burned
  • Excessive overclocking in an overheating environment
    1. a) If one of the cases above happens, you shall be charged for your miner maintenance services. For the specific procedures, please refer to the after-sales process

Please ensure your miners are taken care of in a proper farm with cooling and dust filter conditions. Warranty expires if you overclock miners or run them at excessive heat or dusty conditions beyond our target range.